ACME F300 Manual de usuario Pagina 10

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 12
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 9
10
F160 Vision Sensor Selection Guide
NPN Input/Output
PNP Input/Output
20 mm field of view
50 mm field of view
Without lens or light source
Keypad with shortcut buttons
5.5 inch color LCD
Memory capacity: 64 Mbytes
For double-speed camera & compatible F150 cameras;
Cable length: 3 m
For compatible F200/F300 cameras; Cable length: 3 m
For F300-S only; Cable length: 3 m
Cable length: 2 m
Loose-wire cable for parallel I/O connectors; Cable length: 2 m
A set of six extension tubes that are 40, 20, 10, 5, 1, and
0.5 mm in length respectively
F160-C10E
F160-C15E
F160-SLC20
F160-SLC50
F160-S1
F160-KP
F150-M05L
F160-N64S
F150-VS
F160-VSR3
F160-VSR4
RCA/BNC Video Cable
F160-VP
F150-EXT
Controller
Double-speed camera
with fixed lens &
intelligent lighting
Camera only
Console
Color LCD monitor
Memory card
Camera cable
Monitor cable
Parallel I/O cable
Extension tubes
CommentsModel NumberName
Ordering Information
First: Start by selecting the controller part number with the correct input/output type, NPN or PNP, to meet
the applications needs.
Second: Choose from the three F160 double-speed cameras. Select one or two cameras based on the application.
If a 20 or 50 mm field of vision can be used with the Intelligent Light Source, choose from the
F160-SLC20 or F160-SLC50. (See page 6 for SLC20 & SLC50 setting information.) If different field of
view and lighting is required, use the F160-S1 camera without lens and light source.
Third: Choose camera cables, Parallel I/O cable, monitor and monitor cable as required. For additional camera
cable and parallel I/O cable lengths and monitor options, please consult your Omron vision
representative.
Fourth: If F160-S1 camera option is used, refer to the Lens Selection Guide next to choose a lens for the
application. The F160-S1 camera also offers the intelligent lighting interface to allow the use of
controllable external lighting options. Please consult your Omron vision representative for additional
assistance in lens selection and lighting options.
++++
Vista de pagina 9
1 2 ... 5 6 7 8 9 10 11 12

Comentarios a estos manuales

Sin comentarios